Atec EM-Test-CWS500N3 User Manual

Cws 500n3

DATA SHEET > CWS 500N3 > 20090605

CWS 500N3

SIMULATOR FOR LOW FREQUENCIES 10 HZ - 250 KHZ

FOR TESTS ACCORDING TO ...

> Chrysler CS-11979
> DaimlerChrysler DC-10614
> DaimlerChrysler DC-10615
> DO 160 Section 18
> Fiat 7.Z0450 (2004)
> Ford EMC-CS-2009.1
> Ford ES-XW7T-1A278-AC
> GMW 3097 (2006)
> ISO 11452-10
> ISO 11452-8
> EMC-CS-2010JLR V1.1 (2011-01)
> MIL STD 461 D CS 101
> MIL STD 461 D CS 109
> MIL STD 461 D RS 101
> MIL STD 461 E CS 101
> MIL STD 461 E CS 109
> MIL STD 461 E RS 101
> MIL STD 461 F CS 101
> MIL STD 461 F CS 109
> MIL STD 461 F RS 101
> PSA B21 7110 Rev.C, Ad. 2010-05
> ...

CWS 500N3 - TESTING OF RIPPLE NOISE AND MAGNETIC FIELDS

Key applications of the CWS 500N3 are in the automotive and aerospace area. Various international standards and MIL
requirements call for magnetic field tests in the low frequency range. Apart from this the automotive industry requires
conducted immunity tests with superposed sinusoidal signals on the DC supply voltage (ripple noise). For both applications
the CWS 500N3 is the perfect equipment including everything in a single box, necessary for these tests.
The CWS 500N3 meets requirements of SAE J1113-2, ISO 11452-8, DO 160D/E Section 18 and MIL-STD-461 D/E CS101,
CS109 and RS101.

HIGHLIGHTS

> Most compact equipment for ripple noise on ac/dc

supplies and magnetic fields

> Built-in LF signal generator
> Built-in LF amplifier
> Built-in LF transformer 2:1
> Built-in frequency-selective voltage and current

meter

APPLICATION AREAS

AUTOMOTIVE

AVIONICS

MILITARY