Atec AR-CI00400A - Manual (Page 2)

Page 2 of 2
RF Amplifier Specifications
Frequency range 10 kHz to 400 MHz
Power rating 100 Watts Nominal
1dB compression 75 Watts Nominal
Harmonic Distortion -20dBc at 50 Watts
Mismatch tolerance 100% of rated power without
fold back. Will operate without
damage or oscillation with any
magnitude of source and load
impedance.
Gain 51dB minimum
Connections
RF Out Type N (front)
Monitor Port In Type N (front)
Signal Generator Out Type N (rear)
Directional Coupler In Type N (rear)
Amplifier Out/In Type N (rear)
Pulse In BNC (rear)
Communication GPIB (IEEE 488) (rear)
Directional Coupler Fwd Out Type SMA (rear)
Directional Coupler Fwd In Type SMA (rear)
Directional Coupler Rev Out
(with Option 1) Type SMA (rear)
Directional Coupler Rev In
(with Option 1) Type SMA (rear)
Monitor Port Out Type SMA (rear)
Monitor Port In Type SMA (rear)
Power Meter Calibration Port Out Type SMA (rear)
General
Power 115/230 VAC
50/60 Hz, single phase 16A
Breaker 2 pole, 20A
Cooling active cooling, air ventilation
Environmental conditions 10°C - 40°C
Dimensions, 50.3 x 42.2 x 52.1 cm
19.8 x 16.6 x 21.7 in
Weight 22.7 kg (50.0 lb)
Weight CI00400AM5 17.3 kg (38.2 lb)
Control Software
emcw ar e® Software Suite
PC Requirements
Computer 2GHz Single Core Processor
Operating system Windows XP, Windows Vista,
Windows 7
RAM 1 GB Minimum
Screen Resolution 1024 x 768
Ports 2 available USB 2.0 ports
Options
1 Additional power head to add the ability to monitor
reverse power
2 Data acquisition card.
3 Laptop PC with software preinstalled
4 Amplifier removed; requires use of external amplifier
MODEL CONFIGURATIONS
MODEL DESCRIPTION
CI00400AM1 Includes Option 3
CI00400AM2 Includes Options 2 and 3
CI00400AM3 Includes Option 2
CI00400AM4 Includes Option 1
CI00400AM5 Includes Option 4
CI00400AM6 Includes Options 1 and 4
CI00400AM7 Includes Options 1 and 3
ACCCESSORY KITS
Application Model Description
IEC 61000-4-6
BCI Clamp
50 System
TK1000 Conducted immunity test kit containing all the attenuators, injection
probes, calibration fixtures, calibration resistors, and termination
resistors necessary for IEC testing.
IEC 61000-4-6
BCI Clamp
150 System
TK1001 Conducted immunity test kit containing all the attenuators, injection
probes, calibration fixtures, calibration resistors, and termination
resistors necessary for IEC testing.
IEC 61000-4-6
EM Clamp
50 System
TK1002 Conducted immunity test kit containing all the attenuators, injection
probes, calibration fixtures, calibration resistors, and termination
resistors necessary for IEC testing.
MIL-STD-461
DO160
TK2000 Conducted immunity test kit containing all the attenuators, injection
probes, calibration fixtures, calibration resistors, and termination
resistors necessary for MIL-STD-461 and DO160 testing.
Automotive TK3000 Conducted immunity test kit containing all the attenuators, injection
probes, calibration fixtures, calibration resistors, and termination
resistors necessary for automotive testing.