Atec Com-Power-AH840 User Manual
Horn antenna features, Application, Description
A-21
Horn Antenna
Features
Broadband - 18 GHz to 40 GHz
High gain
Individual calibration
Two year warranty
Application
The AH-840 was designed for EMC testing, but
it can also be used for antenna gain pattern
measurements, surveillance, and other applica-
tions. The wide frequency band makes the AH-
840 antenna suitable for sweep measurements,
reducing the need for antenna switching during
the tests.
High gain reduces the input power requirement
to achieve the desired field levels for immunity
testing and improves antenna sensitivity to low
level signals. During emissions testing the mea-
sured field strength can be calculated by adding
the antenna factor for the particular frequency to
voltage measured at the antenna output terminal.
For immunity measurements, the input power
requirement P in Watts to generate E Electric
Field Strength in V/m at a distance D in meters
can be calculated by using the following for-
mula:
P = E
2
x D
2
/ 30 x N
N = 10
(G/10)
G = 20 log F -29.79- AF
Where
N = Numeric Gain
G = gain in dBi
F = Frequency in MHz
AF = antenna factor in dB/m
AH-840
Description
Model AH-840 is a broadband linearly polarized
double ridged waveguide horn antenna designed
specifically for Electromagnetic Interference
testing. This antenna can be used for receiving
as well as transmitting applications for the fre-
quency range of 18 GHz to 40 GHz.
This antenna has a high gain; least 20 dBi over
the entire frequency range. This antenna can
accept up to 5 Watts of input power at its termi-
nals in continuous mode for generating electro-
magnetic fields for immunity testing.
The AH-840 Horn antenna has a K type connec-
tor which can mate with SMA type connectors.
The antenna is constructed using lightweight
aluminum with corrosion resistant finish. The
oval rear plate has a 1/4" x 20 threaded hole for
mounting it to Com-Power AT-100 tripod.
The antenna is individually calibrated at 1 meter
and data and certificate of calibration will be
shipped with the antenna. The data will include
the antenna factor and gain of the antenna.