Atec Com-Power-AC220 - Manual (Page 2)

A-8
Specifications
Frequency Range: 30 MHz - 2000 MHz (AC-220)
30 MHz - 1300 MHz (AC-213)
Power handling: 500 W
Gain: 5 dBi min. (200 MHz -2000 MHz)
Impedance: matched to 50 Ohm
Connector: Type N Female
VSWR: 2:1 average
Weight: 8 lbs. 3.6 kg
Dimensions ((L x W x H): 38 x 50 x 25 inches , 96 x 127 x 63 cm
Typical Antenna Factors (Model AC-213 and AC-220)
Specification subject to change without notice.
All values are typical unless specified.
0.0
5.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
0 2 0 0 4 0 0 6 0 0 8 0 0 1 0 0 0 1 2 0 0 1 4 0 0 1 6 0 0 1 8 0 0 2 0 0 0
F req u en cy (M H z)
Factors (dB/m)
Typical Input Power Requirement in (Watts) at 1 meter antenna spacing to achieve field (V/m)
Com-Power Corporation 20621 Pascal Way, Lake Forest, California 92630 (949) 587 - 9800 www.com-power.com Rev 1201
Freq. 3 V/m 10 V/m
80 0.67 29.7
90 0.70 31.2
100 0.60 26.5
125 0.55 24.5
150 0.16 7.10
175 0.17 7.46
200 0.10 4.24
250 0.09 3.83
300 0.07 2.92
400 0.04 1.90
500 0.03 1.43
Freq. 3 V/m 10 V/m
600 0.02 1.08
700 0.02 1.00
800 0.02 0.88
900 0.02 0.76
1000 0.01 0.64
1500 0.01 0.29
2000 0.01 0.25
38”
50”
25”