Atec Electro-Metrics-ALP-51L - Manual

ELECTRO-METRICS | 231 Enterprise Road, Johnstown, New York 12095
tel: 518-762-2600 | fax: 518-762-2812 | email: [email protected] | www.electro-metrics.com
EM-6871 | Antenna, Loop
Description
The EM-6871 Antenna can be used with any
50 ohm /Receiver/Field Strength Meter to
obtain magnetic field measurements from 30
Hz to 1 MHz.
The EM-6871 Loop Antenna has a balanced
faraday shield that reduces it’s response to
electric fields to an insignificantly small
amount, which results in practically pure
magnetic field measurements.
Applications
The EM-6871 Antenna is particularly well
suited for use in meeting Federal Standards
because they are designed for maximum
sensitivity to the magnetic field in its
respective frequency ranges. Also, this loop
antenna is suited for use in compliance
testing to RE01 and RE101 of MIL-STD-461,
RE04 of MIL-STD-461A, FCC/VDE/CISPR
mandates plus other government standards.
Specifications
Electrical
Frequency Range: 30Hz – 1 MHz
Impedance: Calibrated for use
into 50 Ohms
Output Connector: Type BNC
(shielded from electric fields)
Mechanical
Outside Diameter: 533 mm (21")
Height: 610 mm (24")
Weight: 0.7 kg (1.5 lbs.)
Specifications subject to change without notice.
Unless otherwise specified, product is manufactured in
Johnstown, NY USA.
Ref: 100501