Atec Agilent-11691D - Manual (Page 3)

11691D 11692D
Frequency range 2 to 18 GHz 2 to 18 GHz
Minimum directivity 2 to 8 GHz: 30 dB 2 to18 GHz: 30 dB
8 to 18 GHz: 26 dB 1 8 to 18 GHz: 26 dB 1
Maximum primary line SWR 2 to 12.4 GHz: 1.3 2 to 12.4 GHz: 1.3
12.4 to 18 GHz: 1.40 12.4 to 18 GHz: 1.40
Maximum auxiliary port(s) SWR 1.3 1.3
Nominal coupling (dB) 20 20
Maximum coupling variation with frequency (dB) ±1 dB ±l dB 2
Tracking auxiliary arms * ±0.7 dB 3 *
Maximum primary line residual loss < 2 dB < 1.5 dB
Primary line power 50
Ω average
50
Ω average
Handling capability 250 Ω peak 250 Ω peak
Net weight 1.93 kg (4 1b, 4 oz) 2.72 kg (6 1b, 0 oz)
Dimensions 404.8 mm (15-15/16 in) L 404.8 mm (15-15/16 in) L
133.4 mm (5-1/4 in) H 133.4 mm (5-1/4 in) H
42.9 mm (1-11/16 in)W 42.9 mm (1 -11/16 in)W
11691D connector
Primary line
Option Input/output Auxiliary arms
Standard APC-7/APC-7 N(f)
11692D connector options
Primary line Auxiliary arms
Option Input/output Incident/reflection
11692D-005 N(f)/APC-7 N(f)/N(f)
11692D-001 N(f)/N(f) N(f)/N(f)
11692D-002 N(f)/N(m) N(f)/N(f)
11692D-003 N(f)/APC-7 APC-7/APC-7
11692D-004 APC-7/APC-7 APC-7/APC-7
Connectors
The APC-7 and type-N connectors are stainless steel
designed for durability. The type-N connectors con-
form to MIL-C-39012 or MIL-C-71.
3
1. 24 dB with type-N connector on the INPUT PORT (11691D) or TEST PORT (11692D).
2. Incident to test port.
3. With the test port shorted and not including source match ripple.
* Typical tracking between 11691D and 11692D is ±0.07 dB.
Figure 2. Directivity specifications.
Figure 3. Typical coupling curve.