Atec EMCO-3106-3115-3116 - Manual (Page 7)

32 32 32 32 32
i [email protected]
www.ets-lindgren.com
USA:
Tel +1.512.531.6400
Fax +1.512.531.6500
FINLAND:
Tel +358.2.838.3300
Fax +358.2.865.1233
UK:
Tel +44.(0)1438.730.700
Fax +44.(0)1438.730.750
ONLINE: SINGAPORE:
Tel +65.536.7078
Fax +65.536.7093
EMCO Model 3164-03 Diagonal Dual Polarized Horn Antenna is
designed for wireless test applications and covers all
known wireless service frequencies. The antenna has two
orthogonally placed input feeds that permit simultaneous
measurements for dual polarizations. The antenna can be
used as both a linearly and circularly polarized antenna
over a very broad frequency range. While intended as a
receive antenna, the Model 3164 can be used as a radiator,
with a 200 W maximum continuous power handling
capability.
● 400 MHz - 6 GHz Frequency
Range
● Simultaneous Measurements
for Both Horizontal and Vertical
Polarization
● Cross Polarization Isolation
Better Than 25 dB
● High RF Power Handling
Capability
M O D E L 3 1 6 4 - 0 3
Diagonal Dual Polarized Horn
Electrical Specifications
MODEL FREQUENCY
RANGE
CONNECTOR IMPEDANCE
(NOMINAL)
MAXIMUM
CONTINUOUS
POWER
CROSS-
POLARIZATION
ISOLATION
DIRECTIVITY GAIN
OVER OPERATING
FREQUENCY
VSWR
RATIO
(AVG)
3164-03 400 MHz - 6 GHz <2.5:1 5 dBi -18 dBi >25 dB 200 W 50 Ω SMA (2)
Physical Specifications
MODEL LENGTH
(OVERALL)
WEIGHT WIDTH
(APERTURE)
HEIGHT
(APERTURE)
3164-03 50.8 cm 33.0 cm 33.0 cm 9.0 kg
20.0 in 13.0 in 13.0 in 20.0 lb
Standard Configuration
◗ Horn assembly with mounting flange
◗ Manual
◗ Individually calibrated
Options
None
New!
Released as we went to press.
Model 3164.04 700 MHz – 6 GHz