Atec ETS-Lindgren-3142C - Manual (Page 3)

Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications. 7/03 - 1.5K S © 2003 ETS-Lindgren REV A
Tel +358.2.8383.300
Fax +358.2.8651.233
USA :
Tel +1.512.531.6400
Fax +1.512.531.6500
FINLAND: FRANCE:
Tel +33.1.48.65.34.03
Fax +33.1.48.65.43.69
ONLINE: UK:
Tel +44.(0)1438.730700
Fax +44.(0)1438.730751
JAPAN:
Tel +81.3.3813.7100
Fax +81.3.3813.8068
CHINA:
Tel +8610.8275.5086
Fax +8610.8275.5537
[email protected]
www.ets-lindgren.com
Model 3142C Antenna Factor (without End Plates) Model 3142C Forward Power 1m with End Plates
Model 3142C Forward Power 3m with End Plates
EMC Antennas
Model 3142C
BiConiLog
Model 3142C Gain with End Plates
EMC Antennas
Model 3142C
BiConiLog
Electrical Specifications
MODEL FREQUENCY VSWR MAXIMUM IMPEDANCE CONNECTORS
RANGE RATIO CONTINUOUS (NOMINAL)
(AVG) POWER
3142C 26 MHz – 60 MHz 2:1 500 W 50Ω Type N female (1)
60 MHz – 600 MHz 2:1 1 kW 50Ω Type N female (1)
600 MHz – 1 GHz 2:1 500 W 50Ω Type N female (1)
1 GHz – 3 GHz 2:1 200 W 50Ω Type N female (1)
Physical Specifications
MODEL WIDTH DEPTH HEIGHT WEIGHT
3142C 135.0 cm 124.5 cm 75.0 cm 4.0 kg
without optional end plates 53.1 in 49.0 in 29.5 in 8.8 lb
3142C 137.4 cm 132.1 cm 76.2 cm 6.7 kg
with optional end plates 54.1 in 52.0 in 30.0 in 14.7 lb