Atec ETS-Lindgren-3142E-PA - Manual (Page 2)

Phone + 1.512.531.6400 l [email protected] l www.ets-lindgren.com
Offices in the US, Brazil, Germany, Finland, UK, France, India, Japan, Singapore, China, Taiwan
Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications. 4/13 - PDF/RR © 2013 ETS-Lindgren REV A
EMC Antennas
BiConical with
Pre-Amplifier
Model 3142E-PA
STANDARD CONFIGURATION
n Antenna and Pre-amplifier
n Antenna Mounting Bracket for
1/4 20 Threads
n Stinger Mount
n Pre-amplifier Box Mounting
Brackets
-- 2171B/2170B Antenna Masts
-- 5 cm x 5 cm (2” x 2”) Booms
n AC/DC Power Supply for the
Pre-amplifier Module
n Connection Cable from the
Antenna to the Pre-amplifier Box
n Individually Calibrated at 10m
per ANSI C63.5
n Manual
Electrical Specifications
MODEL FREQUENCY VSWR MAXIMUM CONTINUOUS IMPEDANCE CONNECTOR
RANGE (AVG) POWER (NOMINAL) TYPE
3142E-PA 30 MHz to 6 GHz N/A (Rx Only) N/A (Rx Only) 50 W SMA Female
Physical Specifications
MODEL LENGTH WIDTH HEIGHT WEIGHT (NOMINAL)
3142-PA 139.2 cm 133.9 cm 76.2 cm 5.7 kg
(Antenna) 54.8 in 52.7 in 30.0 in 12.5 lb
Pre-Amplifier 3.9 cm 8.9 cm 3.9 cm .5 kg
(Box) 3.5 in 5.5 in 1.5 in 1.0 lb
OPTIONS
n ETS-Lindgren Offers Several
Non-metallic, Non-reflective
Tripods and Masts
Model 3142E-PA Typical Antenna Factor
The Model 3142E-PA pre-amplifier features a bright LED light,
allowing for easy visual detection of pre-amplifier operation when
unit is mounted onto an antenna tower.