Atec Aemc-CA7027 - Manual

1 www.aemc.com Technical Assistance (800) 343-1391
Fault Mapper Pro
®
Model CA7027
Features
► 11 range scales indicating cable faults
and terminations up to 19,000 ft (6000m)
in feet or meters
► Detects opens, shorts, taps, faulty taps, bridge
taps, splitters, high resistance, wet cables,
splices and more
► Identifies impedance mismatches
► Works with twisted pair, parallel and
coaxial cable
► Selectable cable impedance
(25Ω, 50Ω, 75Ω, 100Ω)
► Over-voltage protection up to 250V
► Adjustable cursor assists in locating faults and
termination
► Built-in tone generator for tracing and
locating cables
► Auto-Ranging scale
► Large high-visibility blue electroluminescent
backlit display
aPPLICatIONs
► Determine length of cable runs
► Find cable faults and the distance to them
► Determine degradation of cables due to
moisture and other contaminants
► Trace and identify cables
► Determine telephone cable connections
and the length to them
The Fault Mapper Pro ® is a hand-held graphical TDR (Time
Domain Reflectometer) designed for identifying and locating faults
on power and communication cables, given access to one end only.
The Fault Mapper Pro ® measures cable length and indicates the
length and distance to cable faults to a range of 9 ft (3m) to 19,000
ft (6000m) on virtually any type of cable. It injects a series of pulses
into the cable under test. The velocity at which the pulses travel is
determined by the type of cable, which is known as the velocity of
propagation (Vp) of the cable. The Velocity of Propagation (Vp) is
adjustable between 1% and 99% enabling accurate calibration to
the cable under test.
The Vp value is expressed as a percentage of the speed of light
(e.g. 67% or ft/mtrs/micro-second), this value will vary according
to the type of cable under test. The Fault Mapper Pro ® can accept
user selectable values between 1 and 99% (or the equivalent value
in feet or meters per micro-second).
Based on the selected Vp and the time taken for the pulses to
travel through the cable, a reflection profile of the cable under test
is displayed. An adjustable cursor assists in locating faults and
termination.
The Fault Mapper Pro ® incorporates an oscillating tone tracer,
which is detectable with a standard tone tracer, for use in the
tracing and identification of cable pairs.
BNC input connectors
Graphical
backlit LCD
Cable select/
Velocity of
Propagation (Vp)
decrement button
Test/Function
select button
Backlight ON/OFF
button
Cable select/
Velocity of
Propagation (Vp)
increment button
Mode select
button (TDR/Tone
Tracer)
Power ON/OFF
button