Atec Doble-TDR900 - Manual (Page 2)

TDR900 accessories:
• Doble Current Probes (20 A / 200 A ranges)
• Optional 90 ft / 27 m Test Cable
(Specify O.C.B. or E.H.V. and quantity)
• Safety Cable 25 ft
• Safety Flag Plug
• Printer Model P1 External USB Thermal Printer
• Mechanical Adapter Clamp Set
(Kit includes three (3) C-Clamps and six (6) Vise-Grip C-Clamps)
• Additional T-Doble Software
TDR900 Technical specifications:
main Contact and Resistor switch Timing
Number of Phases:
3
Breaks Per Phase: 4
OCB Configuration: 3 Contacts
EHV Configuration: [3, 6, 9, 12] Contacts
Resolution: 100 ms
Resistor Detection Range: 10 W to 10 kW
Voltage Isolation to Chassis: 1.0 kV
Trip/Close initiation Control
Maximum Input Current:
± 25 A
Maximum Input Voltage: ± 300 V
Voltage Isolation to Chassis: 1.0 kV
TOG
eTH
eR W
e POW
eR TH
e WORLD
Doble Engineering Company
85 Walnut Street
Watertown, MA 02472 USA
tel +1 617 926 4900
fax +1 617 926 0528
MKT-SL-TDR900-03/10
Doble is certified isO 9001:2000
motion Channels
Number of Channels:
3
Connector: 15-pin “D”
Voltage Isolation to Chassis: 1.0 kV
analog measurement Channels (3a)
Number of Channels:
3
Maximum Input Voltage: ± 300 V
Input Impedance: 1 MW
Resolution: 12 Bit
Ranges: ± 300 V, ± 10 V, ± 2 V, ± 0.2 V
Voltage Isolation to Chassis: 1.0 kV
auxiliary Contact Channels (3X)
Number of Channels:
3
Maximum Input Voltage: ± 300 V
Open Circuit Voltage: 29 V ± 10%
Close Circuit Current: 28 mA ± 10%
Voltage Isolation to Chassis: 1.0 kV
Digital Linear/Rotary motion Transducer
Linear Rotary
Range: 0.0 to 40.0” 0.0 to 2880.0°
0.0 to 1000.0 mm
Accuracy: +/-0.1% of the value +/- 0.1% of the value
+/- 0.1” max error +/- 0.1° max error
Measurement
Resolution:
0.00125” 0.09°
0.03 mm
Velocity: 50 ft/s 120 rev/s max
15 m/s
Acceleration: 1200 g for 50 ms max 30x10 6 °/s 2 max
General
Recordings:
25 seconds (all channels at max resolution)
Up to 30 min (reduced resolution)
Communication: USB or Ethernet
Safety:
Safety Ground
Safety Switch (local and remote)
Audible Indication (test in progress)
Physical specifications:
Dimensions: 24.0 X 15.5 X 8.5 in
60.9 X 39.4 X 21.6 cm
Weight: 22 lbs / 10 kg
Power supply: 100 – 240 V, 50/60 Hz
Temperature: 0° to 50° C operating,
-25° to + 70° C storage
Humidity: Up to 95% relative humidity non-condensing
Specifications are subject to change without notice
For more information, email [email protected].