Atec Agilent-66319D - Manual (Page 4)

84
Mobile Communications DC Sources
40-100 W
(Continued)
More detailed specifications at www.agilent.com/find/66300
Application Specific DC Power Supplies tailored solutions for specific needs
* Opt 1CM Rack-mount kit 66309B/D,
66311B, 66319B/D, 66321B/D:
p/n 5062-3972; 66332A: p/n 5062-1912
* Opt 1CP Rack-mount Kit with Handles,
p/n 5062-3975 (66332A only)
* Opt AXS Rack-mount Kit for side-by-side
mounting, (N/A for 66332A) Locking
Kit p/n 5061-9694; Flange Kit
p/n 5062-3974
Opt 0L1 Full documentation on
CD-ROM, and printed standard
documentation package
Opt 0L2 Extra copy of standard
printed documentation package
Opt 0B0 Full documentation on
CD-ROM only
Opt 0B3 Service manual
* Support rails required
Ordering Information
Opt 100 87 to 106 Vac, 47 to 63 Hz
Opt 120 104 to 127 Vac, 47 to 63 Hz
Opt 220 191 to 233 Vac, 47 to 63 Hz
Opt 230 207 to 253 Vac, 47 to 63 Hz
Opt 004 Make “Hi Compensation Mode”
as default setting
Opt 007 Extra 5-pin output connectors
(2 x p/n 0360-2604
Opt 020 Front-panel Binding Posts
(66332A only)
Opt UJ0 No front panel binding posts
(66332A only)
Opt 521 Solid State Relays
(66309B/D, 66319B/D)
Opt AYK No Solid State Relays
(66309B/D,66319B/D)
Opt 760 Isolation and Reversal
Relays (66332A only)
Opt 8ZJ Delete feet
Opt 8ZL Include feet
Agilent Models: 66309B/D, 66311B, 66319B/D, 66321B/D
Top
Side
425.8mm
16.8"
435mm
17.13"
212.8mm
8.4"
88.1
3.
Rear
88.1mm
3.5"
Accessories
p/n 1494-0060 Rack Slide Kit
(66332A only)
E3663AC Support rails for
Agilent rack cabinets
14565B Device Characterization
with Battery Drain Analysis & Test
Automation
14565U Device Characterization
Software Upgrade (provides upgrade
from 14565A to 14565B Software)
Note: Battery Drain Analysis means
Data Logging and CCDF measurements.
These capabilities require models
66319B, 66319D, 66321B or 66321D
with version A.03.00 firmware or higher
and 14565B or 14565A software version
3.01 or higher.