Atec Agilent-8901B - Manual (Page 3)

Specifications
All parameters describe performance in automatic
operation or properly set manual conditions.
Specifications describe’s the instrument’s
warranted performance.
Supplemental Characteristics (shown in italics)
are intended to provide information useful in apply-
ing the instrument by giving typical, but non-
warranted, performance parameters.
FREQUENCY RANGE:
10 MHz to 1300 MHz.
CARRIER POWER RANGE:
+30 dBm to –20 dBm; 12.5 kHz, 25 kHz
and 30 kHz filters.
+30 dBm to –10 dBm; carrier noise filter.
DYNAMIC RANGE:
115 dB
CARRIER REJECTION (Temp
£35 o C):
>90 dB; for offsets of at least 1 channel spacing
or 5 kHz, whichever is greater.
RELATIVE MEASUREMENT ACCURACY:
±0.5 dB; levels
≥
–95 dBc; 12.5 kHz, 25 kHz and
30 kHz filters.
±0.5 dB; levels
≥
–129 dBc/Hz; carrier noise filter.
CARRIER NOISE FILTER
Filter Noise Bandwidth: 2.5 kHz nominal.
Noise Bandwidth Correction Accuracy (stored
in non-volatile memory): ±0.2 dB.
Supplemental Characteristics:
ADJACENT/ALTERNATE CHANNEL FILTERS
6 dB Filter Bandwidth:
8.5kHz, 12.5kHz adjacent-channel filter.
16.0 kHz, 25 kHz adjacent-channel filter.
30.0 kHz, 30 kHz (cellular radio) alternate-
channel filter.
TYPICAL NOISE FLOOR: – 150 dBc/Hz, 0 dBm carrier
power level. For System noise performance add LO
contribution.
ALL OTHER HP 8901B SPECIFICATIONS ARE
UNCHANGED.