Atec Cushman-6030 - Manual (Page 2)

 Frequency Modes Gen: 1 Hz to 19,999.9 Hz
Tracking Generator
 Swept frequency output is exactly equal to input frequency of spectrum
monitor
 Frequency Range: 10 MHz to 999.9999 MHz
 Sweep Widths: Fixed - 10 kHz, 100 kHz, 1 MHz per div., and 10-1000 MHz
range (for cable fault)
 Output Level: 0.1 µV to 300 mV, continuous
Spectrum Monitor
 Frequency Range: 10 to 1000 MHz
 Dynamic Range: +0 to -115 dB
 RF Attenuator: ≥40 dB in 20 dB steps
 Display Range: 70 dB (10 dB/div.) and 8 dB (1 dB/div)
 Scan Widths: Fixed - 10, 100 kHz/div, 1, 10 MHz/div., and 0-1000 MHz
Oscilloscope
 Frequency Range: DC to 500 kHz
 Horizontal Sweep Rate (Calibrated): 10 msec/div, 1 msec/div, 100 µsec/div, 10
µsec/div, ±5%
Signal Generator
 Frequency Range: 0.45 to 999.9999 MHz
 Level - Range: 0.1 µV to 300 mV rms, continuous
 Modulation: FM/AM/CW
General
 Approx. Weight: 44 lbs
 Dimensions: 8 1/4" H x 15" W x 18" D
 Power Sources: 115/230 VAC ± 10%, 50-400 Hz, 90 Watts