Atec Agilent-8163A-81634A - Manual (Page 8)

High
Bandwidth
The 8163A Mainframe has two slots
for any combination of the modules
listed in this document, or modules of
the 8153A Lightwave Multimeter series.
Connector interfaces should also be
ordered for each input and output, as
well as any bare fiber adapters you
require.
If you want to use optical heads, you
also need an interface module 81618A
(single) or 81619A (dual) and you
may need filter holders, filters, lenses
and connector adapters.
Ordering Information
Connection to Test Devices
The 8163A Lightwave Multimeter
supports a wide range of fiber connec-
tors. For details please refer to the
8163A Configuration Guide. This gives
information on the connector interfaces
and bare fiber adapters for use with
these modules, as well as the filter
holders, filters, lenses and connector
adapters required for the optical heads.
Agilent 8163A Lightwave Multimeter
Stimulus Response Solution
DWDM
DWDM
“Working together
should be a standard.”