Atec AWT-PIM-S1P Series - Manual (Page 2)

Sales Offices
AWT-Global New Jersey
2001 Rt 46 Waterview Plaza,
STE #310 / 71
Parsippany, New Jersey
07054, USA
p: +1 (973) 321-3423
f: +1 (973) 402-8912
e: [email protected]
AWT-Global Nevada
11309 Asilo Bianco Avenue
Las Vegas, Nevada
89138, USA
p: +1 (702) 358-0290
f: +1 (817) 288-0521
System
Measurement Method Reverse (reflected) PIM,
3rd, 5th, 7th, 9th, 11th
and 13th order
Residual PIM < -129 dBm / -172 dBc
User Interface Ports 3x USB 1x LAN, 1x RF
Output (7-16 DIN female)
Display 10.2 inch, touch screen
Transmitter
Frequencies See table
Frequency increments 100 kHz
Frequency accuracy 2 ppm
Power (per tone) 15 - 44 dBm adjustable
(46 dBm opt)
Power Accuracy +/- 0.35 dB
Reverse Pwr. Protection +43 dBm for 5 sec
Receiver
Measurement Range -45 dBm to - 132 dBm
-88 dBc to -175 dBc
Noise Floor <-138 dBm
Dynamic Range (typical) 96 dB (ref: -90 dBm)
Max Input Power -10 dBm
Measurement Accuracy +/- 2dB @ 2 x 43 dBm
Distance to PIM / Distance to VSWR (Opt)
DTP / DTF resolution 0.1 m
DTP Accuracy 0.5 m (typ.)
DTF Accuracy 0.5 m (typ.)
Cable Types Pre stored types & user
can add new cable types
Electrical
Main Power 100-240V, 50/60Hz
Power consumption 640 Watts (VA)
Dimensions / Weight
Dimensions 457 x 305 x 500 (mm)
18.0 x 12.0 x 19.7 (inch)
Weight (freq > 1 GHz) 23 kg (24 kg)
PPOPT1 1kg
Environmental
Operating Temperature -10° C to +50° C
Storage Temperature -20° C to +60° V
Ingress Protection IP66 (lid closed)
IP20 (lid open)
Relative humidity 5% to 90%
(non condensing)
Mechanical shock rating 40G
Product Quality
AWT is committed to
providing our customers
with products meeting the
highest quality standards.
All AWT products undergo
thorough quality checks and
are ISO 9001 and ISO 14001
certified.
For more information on any
of our products or services
please visit our Web site:
www.awt-global.com
Sales Offices
AWT-Global New Jersey
117 Grand Avenue
Hackettstown,
New Jersey 07840
USA
p: +1 (973) 321-3423
e: [email protected]
AWT-Global Nevada
11309 Asilo Bianco Avenue
Las Vegas
Nevada 89138, USA
p: +1 (702) 358-0290
e: [email protected]
Type Description
PPOPT1 Embedded option for distance-to-PIM (DTP), Return Loss, VSWR and
distance-to-fault
PPOPT5 Increases output power. Adjustable range from 20dBm to 46dBm
PACC2 Accessory Kit: low PIM cable 3m DIN(m)-DIN(m), low PIM cable 1m
DIN(m)-DIN(m), low PIM Load 50W / 20W, dual port DIN(m)-DIN(f), PIM
<-168dBc, torque wrench DIN7/16, (4) adaptors, cleaning tabs, carrying
case IP66
PIMGEN PIM generator, preset PIM value 95 dBm (+/-5) for quick system tests
PLOAD100 Low PIM load 100W, PIM < -168 dBc, 700-2700 MHz, with handle
PLOAD50 Low PIM load 50W / 20W (30 mins / permanent), PIM < -168 dBc, 700 -
2700 MHz, dual port DIN(m)-DIN(f), with ear for carabiner or strap
PCAB3M Low PIM cable 3m, PIM < -168dBc, DIN(m)-DIN(m)
TRQWRN25 Torque Wrench 7/16 DIN - 25Nm / 19 ft lb
Technical Specifications
Options & Accessories
Specifications subject to change without further notification