Alpha Technologies Battery Enclosure (BE) - Manual (Page 3)

ALPHA TECHNOLOGIES
DOCUMENT NO.
033-074-C0-001
Revision
3
A
Page
Battery Enclosure (BE) installation
procedure on UPE Enclosure
Parts list:
Qty. Description
1 Battery Enclosure (BE) (033-074-20)
1 “Y”-adapter for battery cabling (p/n 874-655-20)
1 Optional, “Y”-configured Tamper Switch cable (p/n 874-684-21)
3 VRLA batteries (manufacturer and type to match existing batteries).
1 Battery Cable Kit, fused, (p/n 874-202-21)
Required tools:
Digital voltmeter
7/16” wrenches and sockets
Corrosion/Oxidation inhibiting paste for battery terminals
Insulated handle torque wrench and 7/16” socket
Initial torque settings: 110 inch-lbs
Rework torque settings: 75% of original