Alpha Technologies Battery Enclosure (BE) - Manual (Page 12)

ALPHA TECHNOLOGIES
DOCUMENT NO.
033-074-C0-001
Revision
12
A
Page
Battery Enclosure (BE) installation
procedure on UPE Enclosure
Dual Closed-loop magnetic tamper switch
a. Top enclosure switch. Mounted to side flange with 2 #6-32
screws.
b. Top enclosure magnet. Mount to door studs with 2 #6-32
KEPS nuts.
c. Shelf cutouts may vary.
d. Bottom enclosure magnet. Mount to door studs with 2 #6-32
KEPS nuts.
e. Bottom enclosure switch. Mount to top shelf with 2 #6-32
screws.
f. 2-pin connector, plugs into XM/XMS2 or transponder.
a.
b.
c.
d.
e.
f.