Alpha Technologies IDH3 - Manual (Page 18)

18
745-420-B0-001 Rev. A
4.0 Using the Ethernet (Craft) Port, continued
4.1 IDH3 Web Interface, continued
4.1.1 System Overview, continued
Depending on the network confi guration of the computer you are using to connect to
the IDH3 transponder, it may be necessary to set the network interface to a tempo-
rary static IP address. This will make itself known if you can’t bring up the fi rst web
page using 192.168.100.1. Here’s how to resolve that issue, and connect to the
transponder:
Click on the “start” button (lower left button on most Windows computers). When
the window pops up, right-click on “Network” (usually about half the way down the
second column).
Click on the bottom option, “Properties,” and right-click on the network interface you
are using. You’ll see a dialog box much like the one below; scroll down to the entry
“Internet Protocol (TCP/IP)” and then click on “Properties.”