beautypg.com

Aeromotive 18688 - PHANTOM 340 STEALTH FUEL SYSTEM User Manual

Page 3

background image

The enclosed Aeromotive fuel pump assembly utilizes an o-ring sealed AN-06 style feed, return and vent ports. These
ports seal with o-rings; these ports are NOT PIPE THREAD and utilize NO THREAD SEALANT.

The fuel pump used in this tank is either the Aeromotive Stealth 340 (part # 11142) for kit 18688 or the Aeromotive Stealth
(part# 11137) for kit 11189. To insure proper pump function and life, we strongly recommend the following:

Utilize AN-06 (EFI) and AN-08 (carb) size high pressure fuel lines, fittings and o-rings for all connections
from the fuel tank to the engine.

Install a 10 micron post-filter (Aeromotive p/n 12301 or 12321).

Install a remote-mount rollover valve. It must be mounted in a vertical position and mounted as high or
higher than your filler tube.

Fuel pump wiring should be 10 gauge wire and triggered with a relay rated at a minimum of 20 amps
(Aeromotive fuel pump wiring kit 16301).

A return style regulator must be used with the exception of running an ECU that supports a returnless
systems where the ECU controls fuel pressure via PWM. (Aeromotive p/n 13105, 13109 or 13129 for EFI,
13204 for carb).


Failure to follow the above recommendations may result in fuel leakage, bursting of the fuel lines, poor vehicle
performance and/or decreased fuel pump life! Improper installation will void all warranties for this product!

Pump Specifications:

18688 Kit

(Pump #11142)

18689 Kit

(Pump #11137)

Outlet pressure/typical flow:


Continuous Operating Range:

Pump internal By-Pass Pressure:

Current Draw:

10 psi / 408 LPH @ 13.5 V
40 psi / 340 LPH @ 13.5 V
60 psi / 284 LPH @ 13.5 V
5 psi – 65 psi @ 13.5 V

105 psi
13 amps @ 40 psi

10 psi / 272 LPH @ 13.5 V
40 psi / 215 LPH @ 13.5 V
60 psi / 189 LPH @ 13.5 V
5 psi – 65 psi @ 13.5 V

80 psi
8.3 amps @ 40 psi

Aeromotive Commonly Used Fittings
15606 AN-06 ORB to AN-06 Flare (Inlet/outlet/vent fitting)
15649 AN-06 ORB to AN-08 Flare (Inlet/outlet/vent fitting)
15609 AN-10 ORB to AN-06 Flare (fuel filter fitting)
15610 AN-10 ORB to AN-08 Flare (fuel filter fitting)

For AN-06 fuel lines
For AN-08 fuel lines
For AN-06 fuel lines
For AN-08 fuel lines


Aeromotive AN-10 Fuel Filter P/N’s
12301 Red 10 micron Fuel Filter
12321 Black 10 micron Fuel Filter
12351 Chrome 10 micron Fuel Filter
12335 Red 40 micron Fuel Filter
12305 Fuel Filter Bracket

Aeromotive Electrical Components
16301 Fuel Pump Wiring Kit
16306 Fuel Pump Speed Controller

12304 Red 100 micron Fuel Filter
12324 Black 100 Micron Fuel Filter
12354 Chrome 100 micron Fuel Filter
12331 Black 100 micron Fuel Filter w/ Shutoff Valve



Aeromotive system components are not legal for sale or use on emission controlled motor vehicles.

This manual is related to the following products: