Aeromotive 14145 - 07-09 5.4L GT500 FUEL RAIL SYSTEM - Manual

AEROMOTIVE
Part # 14145
07 Ford 5.4L GT500 Shelby Mustang
Fuel Rail Kit
INSTALLATION INSTRUCTIONS
CAUTION:
Installation of this product requires detailed knowledge of automotive
systems and repair procedures. We recommend that this installation be carried
out by a qualified automotive technician.
Installation of this product requires handling of gasoline. Ensure you are
working in a well ventilated area with an approved fire extinguisher nearby.
Extinguish all open flames, prohibit smoking and eliminate all sources of ignition
in the area of the vehicle before proceeding with the installation.
When installing this product, wear eye goggles and other safety apparel as
needed to protect yourself from debris and sprayed gasoline.
WARNING!
The fuel system is under pressure. Do not open the fuel system until the
pressure has been relieved. Refer to the appropriate vehicle service manual for
the procedure and precautions for relieving the fuel system pressure.
Aeromotive system components are not legal for sale or use on emission controlled motor
vehicles.
Supplies needed:
Vehicle service manual
Fuel injector replacement O-rings
Light oil
Solvent parts cleaner
Clean shop towels
This kit contains the following parts:
1ea p/n 14144 Ford 5.4L Shelby Mustang Fuel Rails
1ea p/n 15115 Fuel Sensor Adapter
2ea 10-24 x 5/8” Socket Head Cap Screws
2ea #10 Lock Washers
1ea p/n 15116 3/8” Quick Connect AN-08 Tee Fitting
4ea p/n 15607 –8/-8AN Cutoff Tapered Flare Fitting
1ea p/n 15653 -8 Str. Hose End
1ea p/n 15654 –8 45-Deg Hose End
4ea p/n 15655 -8 90-Deg Hose End
2ea p/n 15665 –8 90-Deg Male ORB Hose End
10ft –8 Stainless Steel Braided Fuel Line
6ea AN-08 O-Ring