Aeromotive 14135 - 04-06 SUBARU 2.0L WRX FUEL RAIL SYSTEM - Manual (Page 6)

32. Thread the o-ring side of one of the AN-08 to AN-06 Banjo fittings into the rear port and
thread the AN-08 cutoff tapered flare fitting into the front port of the driver side fuel rail
33. Reinstall the driver side “Fuel Pipe Protector” to insure that the rail and fittings have
adequate clearance, the front edge of the “Fuel Pipe Protector” may need clearanced to
allow room for the hose end that threads onto the AN-08 union fitting on the front of the
fuel rail.
You may have to
Clearance “Fuel
Pipe Protector” to
clear hose end.