Aeromotive 14135 - 04-06 SUBARU 2.0L WRX FUEL RAIL SYSTEM - Manual (Page 10)

40. After installing all the fuel lines, the system should look similar to below
Ensure the any spilled gasoline and any gasoline soaked shop towels are cleaned up and removed from
the vicinity of the vehicle!
41. Using the supplied 5/16” SAE 30R9 fuel injection hose route a line from the OE fuel
supply line to the fuel supply tee adapter.
42. Using the enclosed ¼” plastic vacuum line extend the OE boost reference line that was
removed from the OE fuel pressure regulator to the new adjustable Aeromotive fuel
pressure regulator.
43. Using the enclosed wire loom clamps secure the fuel line in place as needed.
44. Reinstall any electrical wiring, vacuum lines, fuel lines and throttle body components that
where removed for the original fuel rail removal.