ABUS TVAC10050 Operating instructions - Manual (Page 33)

33
English
9.1 Picture
To make settings for the picture display, press the MENU button and then press the SOURCE button to
select the first menu item.
The selected menu item is shown by a frame. The sub-menu item is highlighted in yellow.
You can navigate between sub-menu items using the SOURCE button. Press the + / - button to increase
or decrease the values of a sub-menu.
PICTURE
Contrast 50
Brightness 50
Hue 50
Saturation 50
Sharpness 50
Color Temp.  Normal 
Scale  Full 
Picture Mode  User 
3D NR  Mid 
MPEG NR  Low 
 Move  Adj.
MENU Exit
Menu item Description Verfügbar in Modus
Contrast Setting the picture contrast
(value ranging from 0 to 100) AV, HDMI, VGA
Brightness Setting the picture brightness
(value ranging from 0 to 100) AV, HDMI, VGA
Color hue Setting the color hue
(value ranging from -50 to +50) AV
Color saturation Setting the color saturation
(value ranging from 0 to 100) AV
Sharpness Setting the picture sharpness
(value ranging from 0% to 100%) AV
Color temperature Setting the color temperature.
You have the following options:
Standard, warm, cold AV, HDMI, VGA
Scale Selection of the picture display
You have the following options:
full / 4:3 / centered AV, HDMI, VGA
Picture mode
Selecting the predefined picture settings or saving the
user settings. You have the following options:
User, standard, soft, dynamic AV
3D NR Setting the noise reduction
You have the following options:
Off / Low / Medium / High AV
MPEG NR Setting the noise reduction for MPEG signals
You have the following options:
Off / Low / High