ABUS TVCC70500 - Manual (Page 30)

30
White Balance (WHITE BAL)
Function Description
ATW Auto Tracking White Balance
The setting for the white balance function will be performed
dynamically and continuously in the range of 1800~10500K.
PUSH Continuous setting for the white balance with limitation of color
temperature range
USER1 / User 2 User defined white balance
B-GAIN (0~255):
Blue value
R-GAIN (0~255): Red value
ANTI CR Optimized white balance settings for fluorescent light, to avoid
cross color effects
MANUAL Manual white balance
B-GAIN (0~255):
Blue value
R-GAIN (0~255): Red value
PUSH LOCK Push Lock
The white balance measurement will be performed by pressing
the „Enter“ button on the control board, and will be stored.
BACKLIGHT
Function Description
OFF The back light handling is turned off.
BLC The conventional back light compensation function is activated.
(Back Light Compensation)
HLC The function for inversion of too bright image areas into black
color is activated (High Light Compensation). Too bright image
areas will be converted to black areas over certain value (e.g.
car lights).
PICT ADJUST
Function Description
MIRROR Horizontal mirror
OFF: Horizontal image inversion is deactive
ON: Horizontal image inversion is active
BRIGHTNESS Brightness (0~255)
CONTRAST Contrast (0~255)
SHARPNESS Sharpness (0~255): A high value of sharpness could increase
the noise level.
HUE Hue (0~255)
GAIN Gain (0~255): Setting for the maximum internal gain
value.