ABUS FUMK50020 Secvest Mini Wireless Magnetic Contact Detector - Manual (Page 12)

– 12 – – 13 –
Introduction
Dear customer,
Thank you for purchasing this mini wireless opening detector.
This device is constructed using state-of-the-art technology.
It meets the requirements of the relevant European and national
statutory guidelines. Its compliance has been certified, and the
relevant certificates and documentation are available from the
manufacturer (www.abus.com). To ensure safe operation, you must
observe these assembly instructions! If you have any questions, please
contact your dealer.
This mini wireless opening detector is used to monitor doors and
windows. It monitors the status (open/closed) of a door or window
in a contactless manner, and transmits this information to a radio-
controlled alarm centre.
This device meets the requirements of EU Directive: 1999/5/EC on
radio and telecommunications terminal equipment and the relevant
certification requirements.
Attention!
Follow the directions and advice in these instructions!
If you do not adhere to these instructions, this will void your
warranty! No liability will be accepted for any consequential loss!
The product may not be modified or reassembled.

!
GB
MoAnLtg. Mini-Funk-Oeffnungsmelder_100x90mm_NEU.indd 12 20.04.12 08:54