AAEON IMBA-Q87A - Manual (Page 44)

3-12 IMBA-Q87A
3.4 Chipset menu
The Chipset menu items allow you to change the settings for the chipset.
3.4.1 System Agent (SA) Configuration
VT-d [Enabled]
Allows you to enable virtualization technology function on memory control hub.
[Enabled] Enables the function.
[Disabled] Disables this function.
The VT-d feature is available only for specific types of CPU.
PCIEx16_1 Link Speed [Auto]
Allows you to configure the PCIEx16 speed.
Configuration options: [Auto] [Gen1] [Gen2] [Gen3]
Primary Display [Auto]
Allows you to decide which graphics controller to use as the primary boot device.
Configuration options: [Auto] [iGFX] [PEG]
Graphics Configuration
Internal Graphics [Auto]
Configures IGD enabled based on setup options. Configuration options:
[Auto] [Disabled] [Enabled]
DVMT Pre-Allocated [32M]
Allows you to select the amount of system memory allocated to DVMT 5.0
used by the Internal Graphics Device. Configuration options: [32M] [64M]
[96M] [128M] ~ [416M] [448M] [480M] [512M] [1024M]
DVMT Total Gfx Mem [256M]
Allows you to select the total amount of system memory allocated to DVMT
5.0 used by the Internal Graphics Device. Configuration options: [128M]
[256M] [MAX]
Primary IGFX Boot Display [VBIOS Default]
Select the video device activated during POST. This setting has no effect if
an external graphics device is present.
SKU1 Configuration options: [VBIOS Default] [CRT] [HDMI] [DVI] [Display
Port]
SKU2 Configuration options: [VBIOS default] [CRT] [HDMI1] [DVI] [HDMI2]