AAEON IMBA-Q87A User Manual
Page 26
IMBA-Q87A
2-18
Audio 2.1, 4.1, or 5.1-channel configuration
Port
Headset
2.1-channel 4.1-channel
5.1-channel
Light Blue
(Rear panel)
Line In
Rear
Speaker Out Rear Speaker Out
Lime (Rear panel) Line Out
Front
Speaker Out Front Speaker Out
Pink (Rear panel) Mic In
Mic In
Bass/Center
Lime (Front panel) -
-
-
7. USB1~4 3.0 ports. These 9-pin Universal Serial Bus (USB) ports connect to
USB 3.0/2.0 devices.
NOTES:
• DO NOT connect a keyboard / mouse to any USB 3.0 port when installing a
Windows
®
operating system.
• Due to USB 3.0 controller limitations, USB 3.0 devices can only be used
under a Windows
®
OS environment and after USB 3.0 driver installation.
• USB 3.0 devices can only be used for data storage.
• We strongly recommend that you connect USB 3.0 devices to USB 3.0
ports for faster and better performance for your USB 3.0 devices.
8. DVI-D port. This port is for any DVI-D compatible device. DVI-D can’t be
converted to output RGB Signal to CRT and isn’t compatible with DVI-I.
9. DisplayPort.* Connect a DisplayPort cable into this port for high-definition
video and audio.
*Co-lay with HDMI. Dual HDMI BOM optional
10. HDMI port. This port is for a High-Definition Multimedia Interface (HDMI)
connector, and is HDCP compliant allowing playback of HD DVD, Blu-ray and
other protected content.
11. USB 2.0 ports. These two 4-pin Universal Serial Bus (USB) ports are
available for connecting USB 2.0/1.1 devices.