AAEON IMBA-Q87A - Manual (Page 31)

2-23 Chapter 2: Motherboard information
8. USB 2.0 connector (10-1 pin USB1112, USB56, USB78, USB910)
These connector are for USB 2.0 ports. Connect the USB module cable to
the connectors. These USB connectors comply with USB 2.0 specifications
that supports up to 480 Mbps connection speed.
IMBA-Q87A Front USB 2.0 Header connectors
+5V USB5- USB5+ GND (NC)
+5V
USB6- USB6+
GND
USB56
PIN 1
+5V USB7- USB7+ GND (NC)
+5V
USB8- USB8+
GND
USB78
PIN 1
+5V USB9- USB9+ GND (NC)
+5V
USB10- USB10+
GND
USB910
PIN 1
+5V USB11- USB11+ GND (NC)
+5V
USB12- USB12+
GND
USB1112
PIN 1
CAUTION: Never connect a 1394 cable to the USB connector. Doing so will
damage the motherboard.
NOTE: The USB module cable is purchased separately.
9. VGA connector (16 pin VGA)
Connect the VGA cable to the pin-header, then install the module to a slot
opening at the back of the system chassis.
IMBA-Q87A VGA Connector
PIN 1
VGA
GND
RDDCA_CLK_R
R_VSYNC
R_HSYNC
RDDCA_DATA_R
NC
GND
+5V
GND
GND
GND
GND
NC
DAC_B
DAC_G
DAC_R