AAEON IMBA-Q87A - Manual (Page 30)

IMBA-Q87A 2-22
6. Serial ATA 6.0Gb/s connector (7-pin SATA6G_1~6)
ThIS connector connects to Serial ATA 6.0 Gb/s hard disk drives via Serial
ATA 6.0 Gb/s signal cables.
NOTES:
• You must install Windows
® XP Service Pack 3 or later version before using
Serial ATA hard disk drives.
• When using hot-plug and NCQ, set the SATA Mode Selection item in the
BIOS to [AHCI]. See section 3.3.5 SATA Configuration for details.
GND
RSATA_TXP5 RSATA_TXN5
GND
RSATA_RXN5 RSATA_RXP5
GND
SATA3G_5
GND
RSATA_TXP4 RSATA_TXN4
GND
RSATA_RXN4 RSATA_RXP4
GND
SATA3G_4 SATA3G_6
GND
RSATA_TXP6 RSATA_TXN6
GND
RSATA_RXN6 RSATA_RXP6
GND
SATA3G_3
GND RSATA_RXP3 RSATA_RXN3 GND RSATA_TXN3 RSATA_TXP3 GND
SATA3G_2
GND RSATA_RXP2 RSATA_RXN2 GND RSATA_TXN2 RSATA_TXP2 GND
SATA3G_1
GND RSATA_RXP1 RSATA_RXN1 GND RSATA_TXN1 RSATA_TXP1 GND
IMBA-Q87A SATA 6.0Gb/s connectors
IMBA-Q87A DIO connector
PIN 1
DIO1
DIO_P#1(GPIO80) DIO_P#3(GPIO82) DIO_P#5(GPIO84) DIO_P#7(GPIO86)
+5V
DIO_P#2(GPIO81) DIO_P#4(GPIO83) DIO_P#6(GPIO85) DIO_P#8(GPIO87) GND
7. Digital I/O connector (10-pin DIO1)
This connector includes 8 I/O lines (In/Out programmable). All of the Digital
I/O lines are programmable and each I/O pin can be individually programmed
to support various devices.