AAEON IMBA-Q87A - Manual (Page 38)

3-6 IMBA-Q87A
3.3.7 PCH-FW Configuration
This screen displays ME Firmware Mode, Type, SKU and version.
3.3.9 USB Configuration
The items in this menu allow you to change USB settings.
The USB Devices lists detected USB devices. If no USB device is connected,
the item shows None.
Legacy USB Support [Enabled]
[Enabled]
Enables support for USB devices on legacy operating
systems (OS).
[Disabled] USB devices can only be in BIOS setup.
[Auto] Allows the system to detect the presence of USB
devices at startup. If detected, the USB controller
legacy mode is enabled. If no USB device is detected,
the legacy USB support is disabled.
3.3.8 AMT Configuration
The items in this menu allow you to change the Intel ® Active Management
Technology (AMT) feature.
Intel
® AMT [Enabled]
Allow you to enable or disable the Intel ® Active Management Technology (AMT) in
the BIOS extension. Configuration options: [Enabled] [Disabled]
• iAMT H/W is always enabled. This option just controls the BIOS extension
execution. If enabled, this requires additional firmware in the SPI device.
• The following two items become configurable only when you set the
Intel ® AMT item to [Enabled].
Un-Configure ME [Disabled]
Sets this item to [Disabled] to unconfigure AMT/ME without using a password or
set it to [Enabled] to use a password. Configuration options: [Enabled] [Disabled]