AAEON EPIC-CV01 Series - Manual (Page 41)

Chapter 3: BIOS setup 3-11
3.6.2 Full Screen Logo [Disabled]
[Enabled] Enables the full screen logo display feature.
[Disabled] Disables the full screen logo display feature.
3.6.3 Wait for ‘F1’ If Error [Enabled]
When this item is set to [Enabled], the system waits for the F1 key to be pressed
when error occurs. Configuration options: [Disabled] [Enabled]
3.6.4 Boot Option Priorities
These items specify the boot device priority sequence from the available devices.
The number of device items that appears on the screen depends on the number of
devices installed in the system.
NOTES:
• To select the boot device during system startup, press after the first
screen appears.
• To access Windows OS in Safe Mode, press after POST.
3.6.5 Boot Override
These items displays the available devices. The number of device items that
appears on the screen depends on the number of devices installed in the system.
Click an item to start booting from the seleacted device.
3.7 Tools menu
The Tools menu items allow you to configure options for special functions. Select
an item then press to display the submenu.
EZ Flash 2 Utility
Allows you to run EZ Flash 2. Press [Enter] to launch the EZ Flash 2 screen.