AAEON PCM-QM77 - Manual (Page 125)

C o m p a c t B o a r d P C M - Q M 7 7
4.1 Installation:
Insert the PCM-QM77 DVD-ROM into the DVD-ROM drive. And
install the drivers from Step 1 to Step 10 in order.
Step 1 – Install Chipset Driver
1. Click on the STEP 1-CHIPSET folder and select the OS
folder your system is
2. Double click on the infinst_autol.exe file located in each
OS folder
3. Follow the instructions that the window shows
4. The system will help you install the driver automatically
Step 2 – Install VGA Driver
1. Click on the STEP2-VGA folder and select the OS folder
your system is
2. Double click on the Setup.exe file located in each OS
folder
3. Follow the instructions that the window shows
4. The system will help you install the driver automatically
Note 1:

This motherboard supports VGA and LVDS display devices. In
Single Display mode, use the hot keys to switch between VGA to
LVDS device or vice versa. By default, press
++ to switch to VGA device and press
++ to switch to LVDS device.

Before removing the current display device, connect the display
device that you want to use, and then press the hot keys to
switch to that device.
Chapter 4 Driver Installation 4 -3