Elmo Rietschle R-WPB - Manual (Page 4)

Rietschle Thomas GmbH + Co. KG page 4 / 23
WARNING
On no account should the compact unit be lifted
with the ropes attached to the set bases, blower
flanges, suction silencer, and/or motor!
Acoustic enclosure
Smaller types of acoustic enclosures, in which compact
units are placed, can be handled by a crane or a forklift
truck. Ropes must be placed under the bottom base as
displayed in the picture - in the direction shown by the
arrows. The forks of the forklift truck must also be placed
in the direction shown by the arrows.
Larger types of acoustic enclosures are equipped with
lifting-eye nuts. If crane handling of the hoods is
impossible, they can be handled with a forklift truck. When
handling the enclosure with a forklift truck, you must put
baulks on the truck forks (where the enclosure is placed) in
order to prevent damage to the enclosure. The enclosure
can also be disassembled into individual parts and then
reassembled at the place of installation. The following
pictures show the handling of acoustic enclosures.
Motors
The handling of motors is described in the motor manual.
For handling, motors are usually equipped with eye screws.
Without a compact unit
With a compact unit