Elmo Rietschle R-WPB - Manual (Page 2)

Rietschle Thomas GmbH + Co. KG page 2 / 23
T
ABLE OF CONTENTS
1. Introduction
1.1. Basic information
1.2. Symbols used in the manual
2. Transport, Handling and Storage
2.1. Transport and transport data
2.2. Handling
2.3. Storage conditions
3. Installation and Assembly
3.1. Assembly conditions
3.2. Space necessary for installation and operation
3.3. Requirements for anchoring the blower set or blower
3.4. Requirements for connecting the pipeline
3.5. Instruction for connecting the blower set to the power supply
3.6. Belt installation
3.7. Precautionary measures
3.8. Machine hall ventilation
4. Machine
4.1. Blower description
4.2. Blower set description
4.3. PVO combined safety and starting valves
4.3.1. Starting valve function
4.3.2. Safety valve function
4.4. Noise-damping hood
4.5. Use
4.5.1. Work media
4.5.2. Suction and discharge temperatures
4.5.3. Suction and discharge pressures
4.5.4. Lubricant specification
4.5.5. Maximum temperatures of the lubricating system
4.5.6. Maximum speeds
4.5.6.1. Pulley revolutions
4.5.6.2. Work medium speed
4.5.7. Necessary safety equipment
4.5.8. Warning against use in explosion-hazard environments
4.5.9. Recommendations for operation at a temperature of 0
o C and lower
4.5.10. Application fields for blowers and blower sets
4.5.11. Electrical equipment data
4.5.12. Certificate of conformity
5. Operating the Machine
5.1. Inspection prior to first turning on the compact unit or base unit
5.2. First turning on of the compact unit or base unit
5.3. Trial Operation
5.3.1. Check intervals for trial operation
5.4. Emergency stopping controllers
5.5. Setting and adjustment instructions
5.5.1. Filling and changing the oil
5.5.2. Replacing the filter inserts of the suction filter
5.5.3. pulleys and belt tension
5.6. Running without operators
5.7. Plates and labels used on compact unit or base unit
5.8. Instructions for tracing simple failures
5.9. Routine maintenance and checks
5.10. Service checks executed by the manufacturer
5.11. Information on improper use
5.12. Information on residual risks
5.13. Places of excessively hot surfaces
5.14. Equipment for protecting operators against residual risks
5.15. Spare parts
6. Taking the machine out of operation and waste disposal
7. Noise level
8. Training operators
9. Pressure Device
10. Non-standard blower drive
Appendices
1. Identification of Characteristic Values, Standard compact unit Diagram, and
pressure ratios of standard blower set
2. PVO Combined Safety and Starting Valve - Assembly
3.1 Forced and natural ventilation
3.2 Forced and natural ventilation
4. Connection diagram of the acoustic enclosure fan (3 x 400V)
5. Connection diagram of the acoustic enclosure Fan (240 V)
6. Report on measurement of blower set oscillation power
Catalogue sheet (dimensional drawing) of the compact unit
Catalogue sheet (dimensional drawing) of the compact unit in the acoustic
enclosure
Quality certificate
Connection diagram of the electric motor (not included in this Manual,
submitted on request)