beautypg.com

Introduction – Gorman-Rupp Pumps 06C1-GAR 1289163 and up User Manual

Page 4

background image

0 SERIES

OM--05688

PAGE I -- 1

INTRODUCTION

INTRODUCTION

This Installation, Operation, and Maintenance
manual is designed to help you achieve the best
performance and longest life from your Gorman-
Rupp pump.

This manual covers an 0 Series, enclosed impeller,
centrifugal model pump, with straight-in suction,
without a suction check valve. The pump is de-
signed for vehicular mounting in petroleum ser-
vice. The basic material of construction for wetted

parts for the pump is aluminum, with cast iron
wearing parts.

The pump is close-coupled to an integral 1900
RPM gearbox speed increaser with a 2.19:1 ratio.
Power is transmitted to the gearbox through a cus-
tomer-installed universal shaft assembly.

If there are any questions regarding the pump or
its application which are not covered in this man-
ual or in other literature accompanying this unit,
please contact your Gorman-Rupp distributor, or:

The Gorman-Rupp Company

P.O. Box 1217

Mansfield, Ohio 44901--1217

Phone: (419) 755--1011

or:

Gorman-Rupp of Canada Limited

70 Burwell Road

St. Thomas, Ontario N5P 3R7

Phone: (519) 631--2870

For information or technical assistance on the power source, contact the power source manufacturer’s local
dealer or representative.

The following are used to alert maintenance personnel to procedures which require special attention, to
those which could damage equipment, and to those which could be dangerous to personnel:

Immediate hazards which WILL result in

severe personal injury or death. These

instructions describe the procedure re-

quired and the injury which will result

from failure to follow the procedure.

Hazards or unsafe practices which

COULD result in severe personal injury

or death. These instructions describe

the procedure required and the injury

which could result from failure to follow

the procedure.

Hazards or unsafe practices which COULD

result in minor personal injury or product

or property damage. These instructions

describe the requirements and the possi-

ble damage which could result from failure

to follow the procedure.

NOTE

Instructions to aid in installation, operation, and
maintenance or which clarify a procedure
.