ProTeam ProGuard 4 Portable - Manual (Page 7)

ProTeam 7
FILTER ASSEMBLY/REPLACEMENT
WARNING: For your own safety, never connect plug to power source outlet until
all assembly steps are complete and you have read and understood the safety and
operation instructions. Do not operate Vacuum with any parts damaged or missing.
To Remove Power Head:
1. Grasp the tank latches on both the right and left side of the power head.
Slowly pull the tank latches away from the tank. Lift the power head off
the tank. Place the power head of the Vacuum upside down (Figure B).
Pull Out
And
Lift Up
Power
Head
Tank
Latch
Tank
Figure B
!
SP6768-1 PROTEAM 4 GALLON 12/28/11 11:17 AM Page 7