Infinity Drain TDB 20 Series Submittal Sheet - Manual

TDB 20 Series
TDB 20│Tile Drain Series
- 12 gauge 316 Stainless Steel Frame and Body
- ¾″ depth inside frame for material
- ¼″ drainage gap
- Indoor or outdoor use
- Residential grade bonded flange (PVC or ABS) with 4” throat
- Connects to 2”, 3” or 4” waste line
- Uses liquid and fabric sheet membrane waterproofing (not Hot Mop)
- Grate can be removed completely for cleaning
- Requires traditional 4-way floor pitch
- Flow rate 9 GPM with 2″ outlet
Complete Kits:
TDB 20-A SS Bonded Flange ABS Drain
TDB 20-A PS Bonded Flange ABS Drain
TDB 20-P SS Bonded Flange PVC Drain
TDB 20-P PS Bonded Flange PVC Drain
Components:
T 20 B 8″ x 8″ Tile Drain Strainer
BFA 42 Bonded Flange ABS
BFP 42 Bonded Flange PVC
TKEY
Lift Out Key
Dimension are subject to Manufacturers tolerance and change without notice. We can assume no responsibility for use of superseded or void data.
Infinity Drain
18 Secatoag Avenue
Port Washington, NY 11050
Phone: 516.767.6786
Fax: 516.740.3066
www.InfinityDrain.com
REV. 08.01.2013
Note: Installer must verify all rough-in
dimensions prior to installation and consult
local and national codes. Conformity and
compliance to local and national codes
are the responsibility of the installer.
Page 1 of 2
Finishes:
̲____
_
Satin Stainless
_____
Polished Stainless
Installation (TD) Center Drain