Infinity Drain TD 50 Series Submittal Sheet - Manual

TD 50 Series
TD 50│Tile Drain Series
- 12 gauge 316 Stainless Steel Frame and Body
- Incorporates tile or solid surface material within the grate frame
- ¾” depth inside frame for material
- ¼” drainage gap
- Indoor or outdoor use
- Works with 2″ clamp down floor drain with 2″ throat (strainer size)
- Uses Hot Mop, Lead Pan, PVC Vinyl Liner, Rubber Liner (Chloraloy™)
Copper Pan or Fiberglass waterproofing
- Grate can be removed completely for cleaning
- Flow rate 9 GPM per outlet*
Complete Kits:
TD 50-2I SS Clamp Down Drain Cast Iron
TD 50-2I PS Clamp Down Drain Cast Iron
TD 50-2A SS Clamp Down Drain ABS
TD 50-2A PS Clamp Down Drain ABS
TD 50-2P SS Clamp Down Drain PVC
TD 50-2P PS Clamp Down Drain PVC
Components:
TA 6520 20” Stainless Steel Grate
IC 6520 20” Stainless Steel Channel
TNAS
Stainless Steel Threaded Nipple
CDI 22 Clamp Down Drain Cast Iron
CDP 22 Clamp Down Drain PVC
CDA 22 Clamp Down Drain ABS
TKEY
Lift Out Key
Optional Components:
TNRN Stainless Steel Threaded Nipple,
(3" extension)
UCP 2 Universal 2” Clamping Plate
UCP 4 Universal 4” Clamping Plate
ERB Eccentric Reducer Bushing 4” x 2”
Dimension are subject to Manufacturers tolerance and change without notice. We can assume no responsibility for use of superseded or void data.
Infinity Drain
18 Secatoag Avenue
Port Washington, NY 11050
Phone: 516.767.6786
Fax: 516.740.3066
www.InfinityDrain.com
REV. 08.01.2013
Note: Installer must verify all rough-in
dimensions prior to installation and consult
local and national codes. Conformity and
compliance to local and national codes
are the responsibility of the installer.
Page 1 of 2
Finishes:
_____
Satin Stainless
_____
Polished Stainless
Installation (TD) Center Drain