Infinity Drain FFAS 6536 Series Submittal Sheet - Manual

FFAS 65 Series
Finishes:
̲_____
Satin Stainless
_____ Polished Stainless
Complete Kits:
FFAS 6524 24″̲Complete̲Kit
FFAS 6532 32″̲Complete̲Kit̲̲
FFAS 6536 36″̲Complete̲Kit̲
FFAS 6542 42″̲Complete̲Kit̲
FFAS 6548 48″̲Complete̲Kit̲
FFAS 6560 60″̲Complete̲Kit̲
Components:
SA 6524 24″̲Stainless̲Steel̲Grate̲
SA 6532 32″̲Stainless̲Steel̲Grate̲
SA 6536 36″̲Stainless̲Steel̲Grate̲
SA 6542 42″̲Stainless̲Steel̲Grate̲
SA 6548 48″̲Stainless̲Steel̲Grate̲
SA 6560 60″̲Stainless̲Steel̲Grate̲
FC 6524 24″̲Stainless̲Steel̲Fixed̲Channel̲
FC 6532 32″̲Stainless̲Steel̲Fixed̲Channel̲
FC 6536 36″̲Stainless̲Steel̲Fixed̲Channel̲
FC 6542 42″̲Stainless̲Steel̲Fixed̲Channel̲
FC 6548 48″̲Stainless̲Steel̲Fixed̲Channel̲
FC 6560 60″̲Stainless̲Steel̲Fixed̲Channel̲
Dimension are subject to Manufacturers tolerance and change without notice. We can assume no responsibility for use of superseded or void data.
Infinity Drain
18 Secatoag Avenue
Port Washington, NY 11050
Phone: 516.767.6786
Fax: 516.740.3066
www.InfinityDrain.com
REV. 08.01.2013
Note: Installer must verify all rough-in
dimensions prior to installation and consult
local and national codes. Conformity and
compliance to local and national codes
are the responsibility of the installer.
Page 1 of 2
FFAS 65│Fixed Length
- 12 gauge 316 Stainless Steel grate
- 16 gauge 304 Stainless Steel channel
- Pre-pitched̲channel̲with̲“Fixed”̲lengths̲and̲“Fixed”̲center̲vertical̲
(down) outlet location
- Not site sizeable
- Indoor or outdoor use
- Bonded̲“Flange”̲installation̲for̲flush̲against̲the̲wall.
- Lowest height for curbless installations
- Uses Liquid and Fabric Sheet Membrane waterproofing
- Grate can be removed completely for cleaning
- Flow rate 9 GPM per outlet*
*Flow rate measured at outlet only. Measurement does not account
for water in channel or sheeting on shower floor.
Installation (FF) Fixed Flange