Infinity Drain FTED 2532 Series Submittal Sheet - Manual

FTED 25 Series
Finishes:
̲_____
Satin Stainless
_____ Polished Stainless
Complete Kits:
FTED 2532 32″̲Complete̲Kit̲
FTED 2536 36″̲Complete̲Kit̲
FTED 2542 42″̲Complete̲Kit̲
FTED 2548 48″̲Complete̲Kit̲
FTED 2560 60″̲Complete̲Kit̲
Components:
EA 2532 32″̲Stainless̲Steel̲Grate̲
EA 2536 36″̲Stainless̲Steel̲Grate̲
EA 2542 42″̲Stainless̲Steel̲Grate̲
EA 2548 48″̲Stainless̲Steel̲Grate̲
EA 2560 60″̲Stainless̲Steel̲Grate̲
OC 6532 32″̲Fixed̲Flange̲Channel̲
OC 6536 36″̲Fixed̲Flange̲Channel̲
OC 6542 42″̲Fixed̲Flange̲Channel̲
OC 6548 48″̲Fixed̲Flange̲Channel̲
OC 6560 60″̲Fixed̲Flange̲Channel̲
CI 2532 32″̲Channel̲Insert
CI 2536 36″̲Channel̲Insert
CI 2542 42″̲Channel̲Insert
CI 2548 48″̲Channel̲Insert
CI 2560 60″̲Channel̲Insert
Dimension are subject to Manufacturers tolerance and change without notice. We can assume no responsibility for use of superseded or void data.
Infinity Drain
18 Secatoag Avenue
Port Washington, NY 11050
Phone: 516.767.6786
Fax: 516.740.3066
www.InfinityDrain.com
Note: Installer must verify all rough-in
dimensions prior to installation and consult
local and national codes. Conformity and
compliance to local and national codes
are the responsibility of the installer.
Page 1 of 2
FTED 25│Fixed Length
- 16 gauge 304 Stainless Steel grate and channel
- Pre-pitched̲channel̲with̲“Fixed”̲lengths̲and̲“Fixed”̲center̲side̲
“tunnel”̲outlet̲location
- Not site sizeable
- Indoor or outdoor use
- Bonded̲“Flange”̲installation̲for̲flush̲against̲the̲wall
- Allows waste line to connect horizontally to save floor height and
waste line relocation
- Lowest height for curbless installations
- Uses Liquid and Fabric Sheet Membrane waterproofing
- Grate can be removed completely for cleaning
- Flow rate 9 GPM per outlet*
*Flow rate measured at outlet only. Measurement does not account
for water in channel or sheeting on shower floor.
Installation (FT) Flange Tunnel
REV. 10.02.2013