beautypg.com

Infinity Drain S-AG 6536 Series Submittal Sheet User Manual

S-ag 65 series, S-ag 65│site sizeable, Installation (s) site sizable

background image

S-AG 65 Series

S-AG 65│Site Sizeable

-

Modify length and locate outlet on-site

-

Indoor or outdoor use

-

316 Wedge Wire stainless steel grate

-

PVC channel

-

Works with 2″ clamp down floor drain with 2″ throat (strainer size)
(not included)

-

Uses Hot Mop, Lead Pan, PVC Vinyl Liner, Rubber Liner (Chloraloy™)
Copper Pan or Fiberglass waterproofing

-

Grate can be removed completely for cleaning

-

Flow rate 16 GPM per outlet*

*Flow rate measured at outlet only. Measurement does not account
for water in channel or sheeting on shower floor.

Finishes:

_____

Satin Stainless

_____

Polished Stainless

_____

Lifetime Oil
Rubbed Bronze

2” clamp down drain not

included in kit

Complete Kits:

S-AG 6536 36″ Complete Kit
S-AG 6548 48″ Complete Kit
S-AG 6560 60″ Complete Kit
S-AG 6596 96″ Complete Kit

Longer lengths for indoor
or outdoor installations.

Components:

A 6536 36″ Stainless Steel Grate
A 6548 48″ Stainless Steel Grate
A 6560 60″ Stainless Steel Grate
G 6536 36″ PVC Channel
G 6548 48″ PVC Channel
G 6560 60″ PVC Channel
G 6596 96″ PVC Channel
G 65108 108″ PVC Channel
E 65

PVC Stop End

S 50

PVC Threaded Outlet


Add Clamp Down Drain:

CDA 22 Clamp Down Drain ABS
CDI 22 Clamp Down Drain Cast Iron
CDP 22 Clamp Down Drain PVC




Optional Components:

F 65

PVC Non-Threaded Outlet

GJC 65 PVC Straight Joiner Strip
GAM 65 PVC 90° Angle Joiner
TNRN-P PVC Threaded Nipple, (

extends

2⅜" to the S 50 PVC Threaded Outlet)

UCP 2

Universal 2” Clamping Plate

UCP 4

Universal 4” Clamping Plate

ERB

Eccentric Reducer Bushing 4”x2”

Dimension are subject to Manufacturers tolerance and change without notice. We can assume no responsibility for use of superseded or void data.

Infinity Drain
18 Secatoag Avenue
Port Washington, NY 11050
Phone: 516.767.6786
Fax: 516.740.3066

www.InfinityDrain.com

REV. 08.01.2013

Note: Installer must verify all rough-in
dimensions prior to installation and consult
local and national codes. Conformity and
compliance to local and national codes
are the responsibility of the installer.

Page 1 of 2

Installation (S) Site Sizable