Infinity Drain S-TIFAS 6548 Series Submittal Sheet - Manual

S-TIFAS 65 Series
S-TIFAS 65│Site Sizeable
- Modify length and locate outlet on-site
- Indoor or outdoor use
- Incorporates tile or solid surface material up to 3/4” thick within the
grate frame
- 316 stainless steel grate
- Stainless steel channel
- Works with 2″ clamp down floor drain with 2″ throat (strainer size)
- Uses Hot Mop, Lead Pan, PVC Vinyl Liner, Rubber Liner (Chloraloy™)
Copper Pan or Fiberglass waterproofing
- Grate can be removed completely for cleaning
- Flow rate 9 GPM per outlet*
Finishes:
_____
Satin Stainless
_____ Polished Stainless
Dimension are subject to Manufacturers tolerance and change without notice. We can assume no responsibility for use of superseded or void data.
Infinity Drain
18 Secatoag Avenue
Port Washington, NY 11050
Phone: 516.767.6786
Fax: 516.740.3066
www.InfinityDrain.com
REV. 08.01.2013
Note: Installer must verify all rough-in
dimensions prior to installation and consult
local and national codes. Conformity and
compliance to local and national codes
are the responsibility of the installer.
Page 1 of 2
2” clamp down drain not
included in kit
Complete Kits:
S-TIFAS 6540 40″ Complete Kit
S-TIFAS 6548 48″ Complete Kit
S-TIFAS 6560 60″ Complete Kit
S-TIFAS 6580 80″ Complete Kit
S-TIFAS 6596 96″ Complete Kit
Longer lengths for indoor
or outdoor installations.
Components:
TA 6540 40″ Stainless Steel Grate
TA 6548 48″ Stainless Steel Grate
TA 6560 60″ Stainless Steel Grate
TC 6548 48″ Stainless Open Ended Channel
TC 6596 96″ Stainless Open Ended Channel
HC 6532 32″ Stainless Closed Ended Channel
HC 6540 40″ Stainless Closed Ended Channel
HC 6552 52″ Stainless Closed Ended Channel
HC 6572 72″ Stainless Closed Ended Channel
HC 6588 88″ Stainless Closed Ended Channel
8″ Stainless Steel Outlet Section HF 65
TJS 65
TNAS
TIF PL
TKEY
Stainless Steel Joiner Strip
Stainless Steel Threaded
Nipple TIF Plates
Lift Out Key
Sikaflex 1a Construction Sealant
Add Clamp Down Drain:
CDI 22 Clamp Down Drain Cast Iron
CDA 22 Clamp Down Drain ABS
CDP 22 Clamp Down Drain PVC
Optional Components:
SHA 65 Stainless Steel 90° Angle Joiner
TNRN
Stainless Steel Threaded Nipple,
(3" extension)
UCP 2 Universal 2” Clamping Plate
UCP 4 Universal 4” Clamping Plate
ERB Eccentric Reducer Bushing 4” x 2”
Installation (S) Site Sizable
TE 65 Stainless Steel End Section