Imetec PROFESSIONAL SERIE GL 2000 - Manual (Page 14)

GB
12
CLEANING AND MAINTENANCE
• Turn the grill off by setting the switch O / I (1) to O.
• Remove the electric plug (14) from the socket.
• Let the grill cool down completely.
• Remove the plates (8) (9) by opening the front securing hooks (11) and lifting them
upwards.
• Wash the removable components: the plates (8) (9) and the liquid drain containers (15)
(16) by hand or in the dishwasher.
• In the dishwasher, the maximum temperature of the water must not exceed 55°C.
• In case of crusty residue on the plates (8) and (9), place them in hot water with detergent
for a few minutes.
• Clean the metal body (2) with a damp, well-wrung sponge.
• Dry with a dry cloth.
DO NOT use abrasive sponges or sharp tools, which could ruin the non-stick
coating.
DISPOSAL
The packaging is made up of recyclable material. Dispose of it in compliance with the
environmental protection standards.
The product must be disposed of properly, in accordance with the provisions of
European standard 2002/96/EC. The recyclable materials contained in the appliance
must be recovered so as to prevent environmental pollution. For further information,
contact the local disposal body or the appliance dealer.
ASSISTANCE AND WARRANTY
To request repairs or purchase spare parts, please contact IMETEC’s authorised customer
service centre on the Toll-Free Number below or via the website. The appliance is covered
by the manufacturer’s warranty.
For details, read the attached warranty sheet. Failure to comply with the instructions for use
and maintenance provided in this manual will render the manufacturer’s warranty null and
void.
www. imetec.com
Tenacta Group S.p.A. Via Piemonte 5/11 24052 Azzano S. Paolo (BG) ITALY
Tel. +39.035.688.111 Fax +39.035.320.149
MI000811
1211 (MM
yy
)