Imetec PROFESSIONAL SERIE GL 2000 - Manual (Page 11)

GB
9
SYMBOLS
Warning ON position
Prohibited actions OFF position
DESCRIPTION OF THE APPLIANCE AND ACCESSORIES
Look at Figure [Z] in the illustration section to check the content of the packaging. All figures
are found in the inside pages.
1. O / I switch
2. Metal body
3. Handle
4. Thermostat
5. Mains connection LED
6. Ready-for-use LED
7. Rear feet
8. Upper plate
9. Lower plate
10. Drain spout
11. Front plate securing hooks
12. Rear plate securing hooks
13. Technical data
14. Power supply cord
15. Front liquid drain tray
16. Rear liquid drain tray
CLEANING BEFORE FIRST USE
• Unpack the appliance.
• Remove any inserts or adhesive labels from the product.
• Wash the removable components: the plates (8) (9) and the liquid drain containers (15)
(16) by hand or in the dishwasher.
• In the dishwasher, the maximum temperature of the water must not exceed 55°C.
• Clean the metal body (2) with a damp, well-wrung sponge.
• Dry with a dry cloth.
ASSEMBLY
ATTENTION!
• DO NOT touch the plates and the outer surfaces during operation. Pay
particular attention when positioning the plates.
• NEVER place the grill on paper/cardboard or plastic surfaces. Place the
grill on a flat and regular surface.
• Unwind the power cord completely before use.
• When used the first time, the grill could emit some smoke or smell, due to
possible manufacturing residue. Wait a few minutes before inserting the food.
• Slide the plates (8) (9) into the rear securing hooks (12) [A].
• Lower the plates (8) (9) on to the front securing hooks (11) until a click is heard [B].