Imetec BELLISSIMA FLASH & GO DISPOSABLE LAMP User Manual

Page 88

1. press the switch-on/stand-by button (10) to set

the appliance in stand-by mode.

2. Disconnect the plug (14) from the socket.

3. Grasp the sides of the lamp (5) and remove it from

the handpiece.

4. unwrap a new lamp (5).

5. insert the new lamp (5) into the handpiece by

pressing gently.

Note

after having replaced the lamp (5) with a new one, always set the power

level to a lower one than that used normally. increase the power level for the

subsequent session only if no abnormal discomfort is felt during or after the

treatment.

MI000875.indd 82

02/04/12 13.14