Imetec BELLISSIMA FLASH & GO DISPOSABLE LAMP - Manual (Page 87)

GB
81
MaiNtENaNcE
clEaNiNG aND storiNG
it is recommended to clean the appliance and the treatment surface (5a) after
each hair removal session:
• Disconnect the appliance from the power supply (14) before cleaning it.
• Clean the surface of the handpiece and the treatment surface (8) gently,
with a dry, clean cloth.
• store the appliance in a cool dry place, away from heat and water.
attENtioN:
Never place the appliance or any of its parts in water!
rEplaciNG tHE laMp (5)
• When the lamp (5) has emitted 90% of the light pulses available, the lamp
replacement leD (13) starts to flash.
• When the pulses used are close to 100% of those available, the lamp
replacement leD (13) starts to flash slower.
• When no more lamp pulses (5) are left, the lamp replacement leD (13)
remains on and no further pulses can be emitted.
• the lamp (5) must be replaced with an original one for the relative model
in order to continue the treatment session.
Note: do not use the lamp and have it replaced if large stains appear inside
the lamp (5) or the treatment surface (5a) is cracked or broken.
MI000875.indd 81 02/04/12 13.14