Imetec BELLISSIMA FLASH & GO DISPOSABLE LAMP User Manual
Page 85
GB
79
attENtION:
before starting the treatment, read the paragraphs relative to safety warnings,
contraindications, precautions for safe use, possible side effects, treatment
areas and hair removal program.
usE
prEpariNG tHE appliaNcE
1. remove the handpiece and the other components from the package.
2. verify that the lamp (5) is inserted correctly into the appliance.
3. If the appliance is stored in a very cold place, wait for it to reach at least
15°C.
4. insert the adapter cable (14) into the power supply connection (4).
5. insert the adaptor (14) in a socket: the stand-by leD lights up (9).
First trEatMENt
6. press the switch-on/stand-by button (10): the switch-on leD (11) lights
up and the ventilation system is activated (the noise is similar to that of
a hair dryer).
7. about 3.5 seconds after having pressed the switch-on/stand-by button
(10), the switch-on leD (11) lights up: the appliance is automatically set
to the lowest power level.
8. apply the treatment surface (5a) firmly on the skin. only when the treatment
surface (5a) is entirely in contact with the skin, the ready-for-use leDs
(6a) start to flash.
9. press the pulse activation button (3). the appliance immediately verifies
MI000875.indd 79
02/04/12 13.14