Appendix – Extron Electronics VSC 150 User Guide User Manual
Page 20
VSC 150 • Remote Control
Remote Control, cont’d
VSC 150
A
Appendix
Specifications
Accessories and Part Numbers
Specifications
Included Parts
Accessories
Using the memory feature
In addition to performing the basic functions, the IR 601
remote control provides a memory storage and recall
feature. The VSC 150 offers 30 factory-defined presets and
30 user-defined memory presets that store combinations of
size, zoom, panning, centering and filtering settings. These
settings are recalled automatically in association with a
particular input signal scan rate.
The VSC 150 also offers three additional user-defined
presets that can be recalled manually via IR 601 or RS-232
remote control.
The IR 601 has four Memory buttons for storing and
recalling up to three presets. To store and recall
combinations of settings with the IR 601, follow these steps:
1
.
Set the sizing/zoom, centering and filtering settings
for the desired computer video source by using the
front panel controls, RS-232 commands, or the IR 601
controls.
2
.
Press the Store button in the Memory area of the
IR 601 control. The Power/signal lock LED flashes for
4 seconds. During that period, press the button
labeled with the number (1, 2 or 3) corresponding to
the desired memory. The image settings are stored in
a user memory slot corresponding to that number. If
the button is pressed after the LED stops flashing, the
settings are not stored.
3
.
To recall a setup that has been stored in memory, press
the appropriate numbered Memory button. The
combination of zoom, sizing and filtering level
settings are recalled.
The same three user-defined presets can also be saved and
recalled using the RS-232 control. To store and recall these
memory presets via RS-232 control, follow these steps:
1
.
Set the sizing/zoom, centering and filtering settings
for the desired computer video source by using the
front panel controls, RS-232 commands, or the IR 601
controls.
2
.
Use the memory commands in the Command/
response table on page 3-5 to save or recall the presets.
3-8