Extron Electronics YCS SW2 User Guide - Manual (Page 16)

YCS SW2 • Specifi cations, Part Numbers, and Accessories
Specifi cations, Part Numbers, and Accessories
YCS SW2 • Specifi cations, Part Numbers, and Accessories A-2 A-3
General
External power supply ................. 100 VAC to 240 VAC, 50/60 Hz, external,
autoswitchable; to 12 VDC, 1 A, regulated
Power input requirements ........... 12 VDC, 0.3 A
Temperature/humidity ................ Storage: -40 to +158 °F (-40 to +70 °C) /
10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) /
10% to 90%, noncondensing
Rack mount .................................... Yes, with optional rack shelf:
1U rack shelf, part #60-190-01 or 60-604-01;
IU, 6” deep rack shelf, part #60-190-10 or
60-604-10;
VersaTools
® rack shelf, part #60-190-20 or
60-604-20.
Furniture mountable with optional
VersaTools Under-Desk Mounting Kit,
#70-212-01
Projector mountable with optional
projector mount kit:
PMK 100 Mini Projector Mount Kit
#70-217-01
PMK 250 Low Profi le Projector Mount Kit
#70-526-02, -03
PMK 300 Multi-Product Projector Mount
Kit #70-374-01
Enclosure type .............................. Metal
Enclosure dimensions .................. 1.7” H x 4.3” W x 3.0” D (1U high, quarter
rack wide)
4.3 cm H x 10.9 cm W x 7.6 cm D
(Depth excludes connectors.)
Product weight .............................. 0.4 lbs (0.2 kg)
Shipping weight ........................... 3 lbs (2 kg)
Vibration ........................................ ISTA 1A in carton (International Safe
Transit Association)
Listings ........................................... UL, CUL
Compliances ................................... CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF ............................................... 30,000 hours
Warranty ........................................ 3 years parts and labor
All nominal levels are at ±10%.
Specifi cations are subject to change without notice.
Specifi cations
Video
Gain ................................................ Unity
Bandwidth ...................................... 5 MHz (-3 dB)
Switching speed ............................ 5 ms (max.)
Standards ........................................ NTSC 3.58, NTSC 4.43, PAL, PAL-N,
SECAM; autodetected
Crosstalk ......................................... 60 dB @ 3.58 MHz
Video input
Number/signal type ..................... 1 S-video, 1 composite video
Connectors ..................................... 1 female 4-pin mini DIN and 1 female
BNC
Nominal level ................................ 1 Vp-p for Y of S-video and for composite
video
0.3 Vp-p for C of S-video
Minimum/maximum levels ........ Analog: 0.3 V to 1.5 Vp-p for video and Y
with no offset at unity gain
Impedance ..................................... 75 ohms
Return loss ..................................... Composite video –34 dB, Y –27 dB,
C -31 dB @ 5 MHz
DC offset (max. allowable) .......... 5.0 V
Input coupling ............................... AC coupled
Video output
Number/signal type ..................... 2 S-video, 1 composite video
Connectors ..................................... 2 female BNC and/or 1 female 4-pin mini
DIN for S-video
1 female BNC for composite video
Nominal level ................................ 1 Vp-p for Y of S-video and for composite
video
0.3 Vp-p for C of S-video
Minimum/maximum levels ........ 0.3 V to 1.5 Vp-p for video and Y
Impedance ..................................... 75 ohms
Return loss ..................................... -40 dB @ 3.58 MHz
Control/remote
Contact closure .............................. 1 female captive screw connector, 5 pole
Contact closure pin confi gurations
1 = input 1, 2 = input 2, 3 = GND,
4 and 5 = autoswitch selection